Facebook YouTube Twitter LinkedIn
     
   

Precision RT66C Ferroelectric Tester

 

RT66C Ferroelectric Tester

 
  RT66B Test System

The Precision RT66C is perfect for a researcher looking for a flexible unit at an affordable price.  The RT66C Test System has a hysteresis frequency rating of 1KHz.  The RT66C is offered in a +/- 200V built-in drive volt option.   The RT66C can be expanded to 10kV with the addition of a 10kV High Voltage Interface and a High Voltage Amplifier. 

Includes Vision Data Acquisition and Management Software.

RT66C Specifications Include:
 
Tester Parameter

RT66C

Voltage Range (built-in drive voltage)

±200V

Voltage Range with an external amplifier and high voltage interface (HVI)

10KV

Number of ADC Bits

14

Minimum Charge Resolution

122fC

Minimum Area Resolution (assuming 1 ADC bit = 1μC/cm2)

12.2μ2

Maximum Charge Resolution

4.8μC

Maximum Area Resolution (assuming saturation polarization = 100μC/cm2)

4.8mm2

Maximum Charge Resolution with High Voltage Interface (HVI)

480μC

Maximum Area Resolution (assuming saturation polarization = 100μC/cm2) w/o HVI

4.8cm2

Maximum Hysteresis Frequency

1KHz

Minimum Hysteresis Frequency

1/8th Hz

Minimum Pulse Width

500μs

Minimum Pulse Rise Time (5V)

500μs

Maximum Pulse Width

100ms

Maximum Delay between Pulses

40ks

Internal Clock

50μs

Minimum Leakage Current (assuming max current integration period = 1 seconds)

10pA

Maximum Small Signal Cap Frequency

2KHz

Minimum Small Signal Cap Frequency

10Hz

Output Rise Time Control

2 settings

Input Capacitance

1pF

Electrometer Input All Test Frequencies for all test at any speed

Yes

* The minimum area resolution under actual test conditions depends upon the internal noise environment of the tester, the external noise environment, and the test jig parasitic capacitance.
*** Tester specifications are subject to change without notice.
 

Includes Vision Data Acquistion Software

 

 Radiant’s Precision Line of Test Systems are driven by Vision Software. Vision is a revolutionary software package that provides exceptional freedom to design, conduct, and review all procedures associated with any material experiment. The Vision test environment will collect all data acquired in a test sequence and organize it in archived data structures along with the test sequence definitions and data analysis tools. The experiment can always be recalled or  reproduced. Data and test conditions can be shared over the Internet to allow collaborative research.

 
 Measurements include, but are not limited to - Hysteresis, Leakage, Charge, Retain, Resist, I/V, Fatigue, C(V), PUND, Imprint, Leakage Current, Remnant Hysteresis, Small signal CV, imprint, retention, and piezoelectric displacement from one hardware configuration.  Radiant offers optional Piezoelectric, Magnetoelectric, Transistor, and Pyroelectric software programs.
 

Rt66C Expandable to 10kV

 
 
The RT66C can be expanded to 10kV with the addition of a 10kV High Voltage Interface unit and High Voltage Amplifier. 
 
Documentation



Support 
 © 2016 - 2017   Radiant Technologies by AccuNet Web Services